Overview
of Loading/Unloading Instructions
Please
refer to the Users Manual for complete detailed operating instructions.
Loading
equipment installed on a Stands Alone unit, requires normal driving
skills and a minimal amount of training.
The approximate loading and unloading time is 2 - 3 minutes.
- Remove
tailgate and store safely.
- Raise
truck dump box 3' - 4'. (This allows the bed to be slightly lower
than the leading edge roller.)
- Back-up
until the bed is under the roller and nearly touching the front
legs.
At this point the box is lowered until the weight is transferred
to the roller from the front legs.
- Release
the front leg locks.
- Reversing
slowly will now apply pressure to the front legs. (As the truck
continues in reverse, the front legs will swing up into the main
frame.)
- Continue
reversing until the truck bed contacts the rear legs.
- Lower
the box. (This will raise the rear legs clear of the ground.)
- Pull
rear leg pins and telescope them up. Secure with the pins.
- Secure
sander/tank with boomers. (The boomer chains must be installed from
underneath where they hook to the truck box. This will minimize
the chance of an insecure load.)
- Hook-up
hydro and any electrical connections.
- Unloading...
is accomplished in the same safe manner by reversing the procedure.
|
